E-mail：sales1@zhrollformingmachine.com
Components:Decoiler, Main Machine, PLC, Hydraulic System, Run out Table
Automatic Metal Ridge Cap Roll Former
The Ridge Cap, used in conjunction with Closure Strips, reliably protects the ridge seam against water infiltration. The peak top and crisp angles provides a classic appearance for your roof. Gibraltar Corrugated Ridge Cap is designed to be used with corrugated metal roofing panels.
Galvanized steel is a trusted, low-maintenance product that is known for durability
Provides a professional finish and protection against the elements when installed with appropriate closure strips
Non-combustible; resistance to fire increases your security and may result in lower insurance premiums
| NO. | ITEM | PARAMETER | NOTE | |
| 1. | Suitable material | Type | Pre-painted sheet, Galvanized sheet | |
| Width(mm) | 312mm | |||
| Thickness(mm) | 0.3-0.8mm | |||
| Yield stress(mm) | G220-G300 | |||
| 2. | Product specifications | Detail as the attached file | ||
| Length | Any length | |||
| 3. | Power requirement | Type | 380v/3ph/50hz | Motor brand shanghai Lichao |
| Main Motor power | 3kw | |||
| Cutter power | 4kw | |||
| 4. | Forming speed(m/min) | 2-3m/min | Not include the time of cutting | |
| 5. | Manual Decoiler(Optional) | Type | Manual | |
| Max capacity | 5t | |||
| Suitable coilID(MM) | 508 | |||
| 6. | Forming stand | 14 | Depend on actual design | |
| 7. | Thickness of structure | 14mm | ||
| 8. | Forming shaft diameter(mm) | 70 | ||
| 9. | Type of cutting | Roll formed and length-set cutting | ||
| 10. | Control system | Panasonic PLC and inverter | ||
| 11. | Install dimension(depend on the final design) | 7.8m×1.5m×1m | Without panel length | |
| 12. | Total weight(Approx) | 4T | Depend on final design | |
With most all roofing applications, there is always a need to finish out the ends and edges of the roofing panels. This is where you will need to apply your Ridge-Cap.we can and do make almost any type of Cap you can throw at us. In most cases a Ridge-Cap is an angle that will cover the top of the roof apex, and the possibilities are many. What we would typically tell most of our customers to do is make a sketch on how they would like THEIR Ridge-Cap to look and we will fabricate that to their needs.
Copyrights © Cangzhou ZhongHeng Machine Manufacture Co.,ltd All Rights Reserved
