E-mail：sales1@zhrollformingmachine.com
Components:Decoiler, Main Machine, PLC, Hydraulic System, Run out Table
UK Market Metal Roof Forming Machine 32-250-1000
Metal Roof Roll Forming Machine is designed to produce various kinds of roofing sheets, wall cladding as per design drawing with desired length.
Where to use the Metal Roof roll forming machine?
People use Roofing Sheet Machine, Such as Roofing Sheet Roll Forming Machine, Trapezoidal Sheet Roll Forming Machine to produce metal sheet for industrial, commercial and residential roof cladding. Although there are numerous profiles of roofing sheet, the process of forming is the same. Coils (GI coils, PPGI coils, GL coils, PPGL coils, etc) go through decoiling, roll forming, cutting and then come out the desired roof products.
| NO. | ITEM | PARAMETER | NOTE | |
| 1. | Suitable material | Type | Pre-painted sheet, Galvanized sheet | |
| Width(mm) | 1250mm | |||
| Thickness(mm) | 0.3-0.8mm | |||
| Yield stress(mm) | G220-G300 | |||
| 2. | Product specifications | Detail as the attached file | ||
| Length | Any length | |||
| 3. | Power requirement | Type | 380v/3ph/50hz | Motor brand shanghai Lichao |
| Main Motor power | 4kw | |||
| Cutter power | 4kw | |||
| 4. | Forming speed(m/min) | 10-15m/min | Not include the time of cutting | |
| 5. | Manual Decoiler(Optional) | Type | Manual | |
| Max capacity | 5t | |||
| Suitable coil OD(MM) | 1000 | |||
| Suitable coilID(MM) | 508 | |||
| 6. | Forming stand | 18 | Depend on actual design | |
| 7. | Thickness of structure | 16mm | ||
| 8. | Forming shaft diameter(mm) | 70 solid | ||
| 9. | Type of cutting | Roll formed and length-set cutting | ||
| 10. | Control system | Panasonic PLC and inverter | ||
| 11. | Install dimension(depend on the final design) | 9.2m×1.5m×1.3m | Without panel length | |
| 12. | Total weight(Approx) | 5.2T | Depend on final design | |
Advantages of Roofing Sheet Roll Forming Machine
1.Low cost ,light weight buy high strength , short building period ,and recycle use .
2.Save material , no wast
3.Easy operation , low maintenance cost
4.Infinite sizing (any size within machine range),help to save material
Optional Accessories of Roofing Sheet Roll Forming Machine
Item Common We Use Optional
1. Decoiler 5Ton Manual Decoiler 5Ton Hydraulic Decoiler
2. Side Structure Wall Panel Type Guide Pillar Type
3. Roller Material 45# Steel GCr15 Bearing Steel
4. Product Table Unpowered Table Auto Stacker
5. Bearing HRB SKF, FAG,NSK
6. Electric Parts Domestic Brand Siemens, Panasonic, Mitsubishi
Copyrights © Cangzhou ZhongHeng Machine Manufacture Co.,ltd All Rights Reserved
