E-mail：sales1@zhrollformingmachine.com
Components:Decoiler, Main Machine, PLC, Hydraulic System, Run out Table
Portable KR-18 Standing Seam Roofing Machine Snap Lock Roof Panel Machine
Standing Seam Roll Forming Machine
What’s Standing Seam Roof System?
Standing Seam Roof System is a new advanced roof system which seam each other through ribbed metal plates. The material can be aluminum magnesium manganese alloy plate, can also be aluminum-zinc plate.
| NO. | ITEM | PARAMETER | NOTE | |
| 1. | Suitable material | Type | Pre-painted sheet, Galvanized sheet | |
| Width(mm) | 1250mm | |||
| Thickness(mm) | 0.3-0.8mm | |||
| Yield stress(mm) | G220-G300 | |||
| 2. | Product specifications | Detail as the attached file | ||
| Length | Any length | |||
| 3. | Power requirement | Type | 380v/3ph/50hz | Motor brand shanghai Lichao |
| Main Motor power | 4kw | |||
| Cutter power | 4kw | |||
| 4. | Forming speed(m/min) | 20m/min | Not include the time of cutting | |
| 5. | Manual Decoiler(Optional) | Type | Manual | |
| Max capacity | 5t | |||
| Suitable coil OD(MM) | 1000 | |||
| Suitable coilID(MM) | 508 | |||
| 6. | Forming stand | 18 | Depend on actual design | |
| 7. | Thickness of structure | 16mm | ||
| 8. | Forming shaft diameter(mm) | 70 solid | ||
| 9. | Type of cutting | Roll formed and length-set cutting | ||
| 10. | Control system | Panasonic PLC and inverter | ||
| 11. | Install dimension(depend on the final design) | 9.2m×1.5m×1.3m | Without panel length | |
| 12. | Total weight(Approx) | 5.2T | Depend on final design | |
IF YOU ARE INTERESTED IN OUR IBR SHEET MACHINE, OR ANY OTHER ROLL FORMING MACHINE(ROOF MACHINE, PURLIN ROLL FORMING MACHINE, FLOOR DECKING MAKING MACHINE, ETC) OFFERED BY ZHONGHENG, PLEASE FEEL FREE TO CONTACT US.
Copyrights © Cangzhou ZhongHeng Machine Manufacture Co.,ltd All Rights Reserved
